,

LIVE CLASSES MAR 1-3 IN SACRAMENTO CA

,

Want to learn some fun tips for making lovely clean and simple cards? Live in the Sacramento area? I’ll be teaching March 1-3 at my dear friend Stephanie’s Paper Garden Boutique and would love to have you join me!

Here’s the details:

Paper Garden Boutique
565 Pavilions Lane
Sacramento, CA . 95825
916-487-2737

• PLEASE CONTACT THE STORE TO REGISTER & RESERVE YOUR SEAT •
SPACE IS LIMITED TO 20 ADULTS PER SESSION

5 of 10 class projects shown here

5 of 10 class projects shown here

TAKE TEN - $40

Each of these clean and simple designs have an extra element of fun, but take only 10 minutes to create and feature easy tricks to simplify your card-making! Please bring a basic tool kit of your preferred adhesive, a small paper trimmer and detail scissors.

  • Friday, Mar 1 10am-12pm

  • Saturday, Mar 2 10am-12pm

  • Sunday, Mar 3 10am-12pm

5 of 10 class projects shown here

5 of 10 class projects shown here

HAPPY EVERYTHING - $40

Charming little details are what make clean and simple cards extra special. I’ll be sharing those little extras that I love to use on these 10 festive creations! Please bring a basic tool kit of your preferred adhesive, a small paper trimmer and detail scissors.

  • Friday, Mar 1 2-4pm

  • Saturday, Mar 2 2-4pm

  • Sunday, Mar 3 2-4pm

We have a lotta laughs and you make a lotta cards! Hope you can join me!

Cheers!

NEW ESSENTIALS BY ELLEN FEBRUARY 2019

Featured set: A Breve Note

I love using Liquid Appliqué to make fluffy. puffy white effects, like the vanilla ice cream on this card! •all the heart eyes• By the by, I’ve never had an affogato, but I think I should soon. Cuz I think I would kinda love it. OK, probably love it a latté! •chinkle•

After my card was finished, I squeezed a round-ish shape where I thought a scoop of ice cream would look good and “puffed” it. If you’ve never used Liquid Appliqué before, here’s a tip (or two):

TIP:

  • If you heat Liquid Appliqué right away, while it’s still wet, it puffs up “irregularly” and uneven, which, depending on the effect you’re going for, looks great, and what I did on this design. Don’t get too close with your heat gun; stay just close enough to watch it puff (you don’t want to scorch it) and then continue heating it gently, so it gets heated all the way thru, for maximum puff.

  • If you don’t heat it thoroughly, it will kinda deflate/collapse down because the gooey stuff on the inside is still wet. You can rectify that by heating it back up (gently) again. It will rise/puff back up and just continue gently heating it until it no longer deflates/collapses and holds its form.

  • If you wait overnight to heat Liquid Appliqué, it will have dried thoroughly and you will end up with a “smooth and consistent” puff—think freshly fallen snow, before any creature has had a chance to make tracks across it.

Inside caption: “Better latté than never” (from A Breve Note)

I actually used my Clean Color Real Brush Markers to lay down color where I wanted it, and then went over some of them lightly with a water brush to blend the colors out as I wanted. It’s kind of an earthy color scheme, but I really like it! (The specific colors I used are listed down below in the supplies) You can intensify the pale colors by going over them and building up the color but you really only need a light touch with the mid-darker colors; those are pretty intense on their own and a little goes a loooong way when you begin to blend them out with a waterbrush. Just sayin’…

The coffee themed stamp sets in this release make me so giddy—I’m caffeine fiend! The whole release is live now—you can see this latest collection here: Essentials by Ellen February 2019 Release. There’s a ton of creative “fuel” in the way of samples and ideas!

I’ll be sharing more samples in the coming days so I hope you’ll come back and see what else I’ve had fun making with this release!

Do you have a particular favorite?

Gemini FoilPress Cheers

I’ve had my head down working on my upcoming release for the Essentials by Ellen line, but I needed to congratulate a young lady on her recent graduation from a dental assistance program and I couldn’t help it—I had to foil the card I wanted to make for her. Used low profile dies and the Gemini FoilPress (you can see a how-to-video HERE).

This Sunburst die set by Hero Arts was perfect for the “popping” visual effect. LOVE!!! •all the heart eyes•

This design also called for more sequins than usual; looks so purdy with the foil, right?!

Thanks for stopping by today and hope your weekend has been splendid!

,

DIY FOILED LETTERPRESS

,

Letterpress has always been my favorite type of stationery—I adore the clean, white space, elegant simplicity, and the luxurious texture of the paper and the debossed images and text.

I’ve been searching for a long time to find a way to do this at home, without an actual press (which I have no room to store/operate anyway). I’ve tried lots (and LOTS) of different methods, but none of them really ever gave me the professional looking results I was hoping for. This has come the closest, and what I also find exciting is that it didn’t make me tear my hair out with lack-luster results. It’s FUN, I didn’t get frustrated, and holy crow, I wanna foil and letterpress ALL THE THINGS!!!

WIN!!! YASSSSSS!!! MAJOR WIN!!! •fist pump•

Can you hear the monkey clappin’????

Notes and suggestions for what I found worked for me are listed directly beneath the video. All supplies I used are listed at the end of the post.

BASIC INFO:

  • The Gemini FoilPress is designed specifically for use with the Gemini Junior; it is also compatible with the regular Gemini, if you use the Extender Plate (available separately). I don’t know if it works with a manual machine, i.e. the Big Shot because I haven’t tried and am unlikely to—the last thing I want to do is break or void the warranty on either machine.

  • The FoilPress uses THERMAL foil; this foil transfers images using a “hot foil stamping” method that requires heat and pressure. Thermal foils will also transfer with sticky mediums such as double-sided sticky tape, double-sided adhesive foam, sticky embossing powder, dries-tacky types of glues.

  • Toner reactive foils, such as iCraft Decofoil, Minc Foils, etc. perform as described; they require toner and heat to transfer (foil images). Toner foils will also transfer with sticky mediums such as double-sided sticky tape, double-sided adhesive foam, sticky embossing powder, dries-tacky types of glues. HOWEVER, these foils do NOT work with hot foil (metal) stamps (dies). Sidebar: The Minc is a heat laminator type machine and is designed to work with toner images, NOT hot foil stamps. Would I risk it? Nope.

  • The FoilPress comes with pretty much everything you need to get started, however, you may need your Gemini Junior Magnetic Shim and/or the Gemini Junior Metal Cutting Shim in some instances.

  • You can foil using the FoilPress on pretty much any paper surface, including card stock, letterpress paper, and vellum (results may vary; I haven’t tried vellum as of this writing). You can also foil with the FoilPress on other flat materials such as leather, thin wood veneers, acetate, cotton fabrics, ribbon. Non-paper surfaces will require multi-surface thermal foils; multi-surface thermal foils are not suitable for paper, according to Crafter’s Companion. I haven’t tested that personally, but I’ll take their word for it.

  • You can use ANY low profile dies to foil with the Gemini Foil Press and Gemini Junior so long as their maximum depth is no more than 1mm; any thicker could damage your machine and will void the warranty.

  • Crafter’s Companion advises against foiling with embossing folders; doing so will void the warranty.


NOTES & SUGGESTIONS:

  • Download the Material Matrix from Crafter’s Companion and keep it somewhere you can refer to it easily when foiling. The Manual is a good starting point and I encourage you to take a few minutes to read it.

  • Always use foil stamps design side up (when foiling low profile dies, place them blades up on the platform; you do not want to cut into the purple silicone heating pad).

  • Place foil pretty (colored) side against the foil stamp/die; the “ugly” side of the foil goes against your paper.

  • Keep in mind you are working backwards/in reverse order, so you won’t be able to see through the foil when placing your paper on top of it; a template like I show in the video may be helpful. Use the grid lines to help with planning your layout and to align things straightly.

  • Once you remove the heated platform from the base, leave it disconnected or use the top panel power button to shut off the heating element until you are ready to foil your next project; it doesn’t take long to reheat when you reconnect/power on the temp setting. If you keep it connected and constantly heating, you will decrease the longevity of the heating element, as well as end up with inconsistent results from overheating.

SANDWICHES:

Hot Foil Stamps/Low Profile Dies (as listed in the manual)-

  1. Stamp/Die design (or blades) UP

  2. Foil, pretty side down against the stamp/die

  3. Paper

  4. Top Plate (heat resistant plate)

Cut n’ Foil Stamps (Dies)* - Heat setting LOW, Timer 10 seconds

  1. Cut n’ Foil stamp (die) design UP

  2. Foil, pretty side down against the stamp/die

  3. Paper

  4. Gemini Junior Metal Cutting Pad

  5. One (1) card stock shim (I used 60# card stock; you can try 80#, but I will admit when I tried 2 shims, it was too much pressure for a crisp clean foil and cut.)

  6. Top Plate (heat resistant plate)

*With the Cut n’ Foil stamp I happened to be using in the video, I couldn’t get good results with the manual’s suggested sandwich nor the timing. Experiment to find your sweet spot, as every machine is calibrated slightly differently.

Hope you found this helpful and that it has you excited about the possibilities now available! This is not intended to be a fully comprehensive guide to the FoilPress—I’m just sharing what worked for me during my play time. OK? OK.

Let me know down below in the comments, if you’d like to see more FoilPress videos from me!

Cheers!

DIY FOILED DIE CUTS

Dad’s birthday is this week, and I wanted to make him a card that “fit” him. My dad is such an interesting man, with a great sense of humor. I love the stories he tells about his time in the USCG, when he was a kid growing up—even if I’ve heard them before, I never get tired of them.

The copper hue of the foil shows up more “coppery” in real life; wish I could have captured it better on camera, but you get the idea. •grin•

I pretty much adore my dad…

Thanks for stopping by today.