Letterpress has always been my favorite type of stationery—I adore the clean, white space, elegant simplicity, and the luxurious texture of the paper and the debossed images and text.

I’ve been searching for a long time to find a way to do this at home, without an actual press (which I have no room to store/operate anyway). I’ve tried lots (and LOTS) of different methods, but none of them really ever gave me the professional looking results I was hoping for. This has come the closest, and what I also find exciting is that it didn’t make me tear my hair out with lack-luster results. It’s FUN, I didn’t get frustrated, and holy crow, I wanna foil and letterpress ALL THE THINGS!!!

WIN!!! YASSSSSS!!! MAJOR WIN!!! •fist pump•

Can you hear the monkey clappin’????

Notes and suggestions for what I found worked for me are listed directly beneath the video. All supplies I used are listed at the end of the post.

BASIC INFO:

The Gemini FoilPress is designed specifically for use with the Gemini Junior; it is also compatible with the regular Gemini, if you use the Extender Plate (available separately). I don’t know if it works with a manual machine, i.e. the Big Shot because I haven’t tried and am unlikely to—the last thing I want to do is break or void the warranty on either machine.
The FoilPress uses THERMAL foil; this foil transfers images using a “hot foil stamping” method that requires heat and pressure. Thermal foils will also transfer with sticky mediums such as double-sided sticky tape, double-sided adhesive foam, sticky embossing powder, dries-tacky types of glues.
Toner reactive foils, such as iCraft Decofoil, Minc Foils, etc. perform as described; they require toner and heat to transfer (foil images). Toner foils will also transfer with sticky mediums such as double-sided sticky tape, double-sided adhesive foam, sticky embossing powder, dries-tacky types of glues. HOWEVER, these foils do NOT work with hot foil (metal) stamps (dies). Sidebar: The Minc is a heat laminator type machine and is designed to work with toner images, NOT hot foil stamps. Would I risk it? Nope.
The FoilPress comes with pretty much everything you need to get started, however, you may need your Gemini Junior Magnetic Shim and/or the Gemini Junior Metal Cutting Shim in some instances.
You can foil using the FoilPress on pretty much any paper surface, including card stock, letterpress paper, and vellum (results may vary; I haven’t tried vellum as of this writing). You can also foil with the FoilPress on other flat materials such as leather, thin wood veneers, acetate, cotton fabrics, ribbon. Non-paper surfaces will require multi-surface thermal foils; multi-surface thermal foils are not suitable for paper, according to Crafter’s Companion. I haven’t tested that personally, but I’ll take their word for it.
You can use ANY low profile dies to foil with the Gemini Foil Press and Gemini Junior so long as their maximum depth is no more than 1mm; any thicker could damage your machine and will void the warranty.
Crafter’s Companion advises against foiling with embossing folders; doing so will void the warranty.

NOTES & SUGGESTIONS:

Download the Material Matrix from Crafter’s Companion and keep it somewhere you can refer to it easily when foiling. The Manual is a good starting point and I encourage you to take a few minutes to read it.
Always use foil stamps design side up (when foiling low profile dies, place them blades up on the platform; you do not want to cut into the purple silicone heating pad).
Place foil pretty (colored) side against the foil stamp/die; the “ugly” side of the foil goes against your paper.
Keep in mind you are working backwards/in reverse order, so you won’t be able to see through the foil when placing your paper on top of it; a template like I show in the video may be helpful. Use the grid lines to help with planning your layout and to align things straightly.
Once you remove the heated platform from the base, leave it disconnected or use the top panel power button to shut off the heating element until you are ready to foil your next project; it doesn’t take long to reheat when you reconnect/power on the temp setting. If you keep it connected and constantly heating, you will decrease the longevity of the heating element, as well as end up with inconsistent results from overheating.

SANDWICHES:

Hot Foil Stamps/Low Profile Dies (as listed in the manual)-

Stamp/Die design (or blades) UP
Foil, pretty side down against the stamp/die
Paper
Top Plate (heat resistant plate)

Cut n’ Foil Stamps (Dies)* - Heat setting LOW, Timer 10 seconds

Cut n’ Foil stamp (die) design UP
Foil, pretty side down against the stamp/die
Paper
Gemini Junior Metal Cutting Pad
One (1) card stock shim (I used 60# card stock; you can try 80#, but I will admit when I tried 2 shims, it was too much pressure for a crisp clean foil and cut.)
Top Plate (heat resistant plate)

*With the Cut n’ Foil stamp I happened to be using in the video, I couldn’t get good results with the manual’s suggested sandwich nor the timing. Experiment to find your sweet spot, as every machine is calibrated slightly differently.

Hope you found this helpful and that it has you excited about the possibilities now available! This is not intended to be a fully comprehensive guide to the FoilPress—I’m just sharing what worked for me during my play time. OK? OK.

Let me know down below in the comments, if you’d like to see more FoilPress videos from me!

Cheers!

SUPPLIES (affiliate links used wherever possible):

Gemini FoilPress Cheers

DIY FOILED LETTERPRESS

SANDWICHES: